4.1. Project: Parameter Estimation¶
This project was created as part of the Computational Physiology module in the MedTech CoRE Doctoral Training Programme.
This project requires you to put together what you have learned in the tutorials to define a complete workflow which we will use to manually optimise the material properties of a tissue model for use in mechanical simulations.
In this project we recreate a typical workflow that is often performed by scientists when creating a model. The standard cardiac workflow used in the DTP module is shown in Fig. 4.1, which can be abstracted into the generic workflow shown in Fig. 4.2.
4.1.2. Geometric model¶
As you may know, caridac tissue consists of cells aligned in fibres, as shown in Fig. 4.4. Mechanically, the tissue is much stiffer in the fibre direction than in the cross-fibre direction, and so it is very important for any model of cardiac tissue to take this into account.
In this project, we use the simplified geometric model shown in Fig. 4.5. While this is a relatively trivial model, it is a reasonable approximation to an often used experimental preparation - the cardiac trabecula.
Fig. 4.6 shows some simulation results when performing some passive stretch experiments using the tissue model from Fig. 4.5. These results illustrate the difference in material properties when stretching the tissue in the fibre vs cross-fibre direction.
4.1.3. Data collection¶
The first step in this project is to collect the experimental data that will be used in estimating the material properties of this tissue. In this project we are using simulated experimental data so that we have some hope that this will be an achievable task. You can see typical experimental data from a real cardiac trabecula that would be used in a lab here: https://youtu.be/_VHZyPEpxsc.
Since our model is homogeneous and transversly isotropic, we can reduce the data required to parameterise the model to two stress-strain relationships - one for the fibre direction and one of the orthogonal cross-fibre direction (see Fig. 4.6). Sample data we will use is shown in Fig. 4.7 and the segmentation method we will use to extract the numerical values of the data is shown in Fig. 4.8.
4.1.4. Constitutive model¶
For this project, we want to predict the passive material properties of the cardiac tissue given the observed experimental data in Fig. 4.7. So in addition to the geometric model in Fig. 4.5 we need a material constitutive model that captures the cardiac tissue properties that we are interested in. For this project we will use the Guccione model. This model, and many other potential models to use, is available in the Physiome Repository - https://models.physiomeproject.org/e/26d/guccione.cellml/view. You will need to download the CellML file for this model from the repository, make sure you save it somewhere convenient.
The equations for the Guccione model are shown in Fig. 4.9 (you can see the exact equations used in the model repository - https://models.physiomeproject.org/e/26d/guccione.cellml/@@cellml_math).
4.1.5. Workflow construction¶
Following the “manual segmentation” method, we will be using a manual parameter estimation method to predict the passive material properties of the cardiac tissue described in Fig. 4.7. Therefore, the second step in this project is to construct a workflow in MAP Client that will let you perform some simulations using the cardiac tissue model with your estimated material parameters, and then compare your simulation results to the data you measured.
You will need to start MAP Client and create a new workflow via the menu item
estimationproject on the Desktop, and select it.
For this project you will need to make use of the following MAP Client steps.
- Iron Simulation – to perform the actual simulation.
- Simulation Review – to compare simulated data to measured data.
- Graph Segmentation – to enter the numeric values extracted from the experimental data.
- File Chooser – to provide the CellML file for the Guccione model.
- Directory Chooser – to define an output folder to store the simulation results.
- Parameter Setting – to define your current estimate of the passive material properties.
We suggest starting with the Iron Simulation step and using the port definitions to determine the workflow connectivity. In the configuration of the workflow, you should be able to enter your current estimates for the four material parameters and the numeric values measured from the experimental data. The Graph Segmentation step expects 10 data points to be given – the first 5 should be the fibre direction and the second 5 the cross-fibre direction.
On execution, your workflow should perform the required simulations and present you with a comparison of your simulation results with the measured experimental data.
4.1.6. Parameter estimation¶
As mentioned, we will be using a manual estimation process in this project. This requires you to use your workflow to estimate parameter values and compare the predicted tissue behaviour to that you have measured from the experimental data. And then repeat until you are happy with the comparison.
Some tips that might help:
- the parameter values are whole numbers
- what is the main effect of each of the parameters?
- how accurate are your measured values?
- how accurate is the printed graph?